DURAEDGE & DURATUBE MSDS

1400 Duraedge Way
Farmersville, TX 75442

MATERIAL SAFETY DATA SHEET

***************************GENERAL INFORMATION***************************

PRODUCT NAME: DURAEDGE, DURATUBE

Creation Date: 2/25/00

Contains two primary components:

Mild Steel Grades

Pigmented Powder

Manufacturer of Steel: Various

MSDS Code A127

Manufacturer of powder coat: SHERWIN WILLIAMS

HMIS Code H F R P
1 1 0 E

***************************PRODUCT IDENTIFICATION***************************

IDENTIFICATION NAME: STEEL

MSDS Code A127

Mild Steel Grades

Formula

n/a

Synonym(s):

Chemical Family

n/a

All slab, roll, & sheet products

************************TYPICAL CHEMICAL COMPOSITION************************

Permissible Air Level

Ingredient

CAS No.

Wt. %

OSHA PEL

ACGIH TLV

Iron

7439-89-6

Balance

10

5

Manganese

7439-96-5

.25-2.0

5

1.0

Chromium

7440-47-0

LT 0.1

0.5

0.05

Nickel

7440-02-0

LT 0.1

1

1

Trace Elements

n/a

LT 2.0

n/a

n/a

Nonmetallic Coatings (optional): See "Additional or Miscellaneous Information

********************************PHYSICAL DATA********************************

Physical State:

Solid

Specific Gravity:

7.6-7.8

Appearance and Odor Gray Metal: odorless Vapor Pressure:

n/a

Boiling Point:

n/a

Vapor Density:

n/a

Melting Point

2800 F

Evaporation Rate:

n/a

Solubility in Water:

n/a

% Volatile by Volume

n/a

Ph:

n/a

As regards the component, various grades mild steel only, this product does not meet the criteria of a hazardous chemical as defined by the Federal Occupational Safety and Health Hazard Communication Standard ( 29 CFR 1910.1200 ). This form is being provided solely as general information and should not be construed as a determination that the product is a hazardous chemical.

Revision Date 030100

****************************PRODUCT IDENTIFICATION****************************

IDENTIFICATION NAME: PIGMENTED POWDER

PRODUCT CODE PG6-7007-T

HMIS Code H F R P
1 1 0 E

SHERWIN WILLIAMS

710 106TH Street
Arlington, TX 76011
Emergency phone: 800-424-9300
Information Phone: 817-640-0848

*******************HAZARDOUS INGREDIENTS/ SARA III INFORMATION*******************

VAPOR PRESSURE

REPORTABLE COMPONENTS

CAS No.

Wt. %

mm Hg @ TEMP

1, 3, 5-TRIGLYCIDYL ISOCYANURATE

2451-62-9

2.0-10.0

n/a n/a

2.5 MG/M3 TWA (0.25 MG/M3 as a raw material

********************************PHYSICAL DATA********************************

Appearance and Odor

Fine, pigmented powder

Vapor Pressure:

n/a

Specific Gravity (H20=1):

1.47

Vapor Density:

n/a

Coating V.O.C.:

0.00 lb/gl

Evaporation Rate:

n/a

Material V.O.C.:

0.00 lb/gl

************************FIRE AND EXPLOSION HAZARD DATA***********************

Flash Point:

n/a

Method Used:

n/a

Flammable limits in air by volume -

Lower: n/a

Upper: n/a

Extinguishing Media: Use carbon dioxide, dry chemical or foam.

Special Firefighting Procedures

n/a

Unusual Fire and Explosion Hazards

n/a

********************************REACTIVITY DATA********************************

Stability:

This material is stable

Conditions to avoid:

Excessive heat and direct sunlight

Incompatibility (Materials to Avoid):

Strong oxidizing agents

Hazardous decomposition or byproducts:

Thermal decomposition may yield carbon dioxide, carbon monoxide, smoke and various toxic fumes

Hazardous Polymerization:

Will not occur

			1400 Duraedge Way Farmersville, TX 75442

MATERIAL SAFETY DATA SHEET

*************************GENERAL INFORMATION*************************
PRODUCT NAME: DURAEDGE, DURATUBE							Creation Date: 2/25/00
Contains two primary components:				Mild Steel Grades			Pigmented Powder
Manufacturer of Steel: Various						MSDS Code A127
Manufacturer of powder coat: SHERWIN WILLIAMS						HMIS Code H F R P 1 1 0 E

*************************PRODUCT IDENTIFICATION*****************************
IDENTIFICATION NAME: STEEL						MSDS Code A127
	Mild Steel Grades				Formula			n/a
	Synonym(s):				Chemical Family			n/a
	All slab, roll, & sheet products

**********************TYPICAL CHEMICAL COMPOSITION**********************
						Permissible Air Level
Ingredient		CAS No.			Wt. %	OSHA PEL		ACGIH TLV
Iron		7439-89-6			Balance	10		5
Manganese		7439-96-5			.25-2.0	5		1.0
Chromium		7440-47-0			LT 0.1	0.5		0.05
Nickel		7440-02-0			LT 0.1	1		1
Trace Elements		n/a			LT 2.0	n/a		n/a

Nonmetallic Coatings (optional): See "Additional or Miscellaneous Information

******************************PHYSICAL DATA******************************
Physical State:		Solid			Specific Gravity:			7.6-7.8
Appearance and Odor		Gray Metal: odorless			Vapor Pressure:
								n/a
Boiling Point:		n/a			Vapor Density:			n/a
Melting Point		2800 F			Evaporation Rate:			n/a
Solubility in Water:		n/a			% Volatile by Volume			n/a
Ph:		n/a

As regards the component, various grades mild steel only, this product does not meet the criteria of a hazardous chemical as defined by the Federal Occupational Safety and Health Hazard Communication Standard ( 29 CFR 1910.1200 ). This form is being provided solely as general information and should not be construed as a determination that the product is a hazardous chemical.
								Revision Date 030100


**************************PRODUCT IDENTIFICATION******************************
IDENTIFICATION NAME: PIGMENTED POWDER					PRODUCT CODE PG6-7007-T			HMIS Code H F R P 1 1 0 E
SHERWIN WILLIAMS
710 106TH Street Arlington, TX 76011					Emergency phone: 800-424-9300 Information Phone: 817-640-0848

*****************HAZARDOUS INGREDIENTS/ SARA III INFORMATION*****************
							VAPOR PRESSURE

REPORTABLE COMPONENTS					CAS No.		Wt. %	mm Hg @ TEMP
1, 3, 5-TRIGLYCIDYL ISOCYANURATE					2451-62-9		2.0-10.0	n/a n/a
2.5 MG/M3 TWA (0.25 MG/M3 as a raw material

******************************PHYSICAL DATA******************************
Appearance and Odor		Fine, pigmented powder				Vapor Pressure:		n/a
Specific Gravity (H20=1):		1.47				Vapor Density:		n/a
Coating V.O.C.:		0.00 lb/gl				Evaporation Rate:		n/a
Material V.O.C.:		0.00 lb/gl

**********************FIRE AND EXPLOSION HAZARD DATA*********************
Flash Point:		n/a				Method Used:		n/a

Flammable limits in air by volume -				Lower: n/a		Upper: n/a

Extinguishing Media: Use carbon dioxide, dry chemical or foam.

Special Firefighting Procedures					n/a

Unusual Fire and Explosion Hazards					n/a

******************************REACTIVITY DATA******************************
Stability:	This material is stable
Conditions to avoid:		Excessive heat and direct sunlight
Incompatibility (Materials to Avoid):				Strong oxidizing agents
Hazardous decomposition or byproducts:
	Thermal decomposition may yield carbon dioxide, carbon monoxide, smoke and various toxic fumes
Hazardous Polymerization:				Will not occur