P.O. Box 36795

Tucson, Arizona 85740

 

MATERIAL SAFETY DATA SHEET

Page 1 of 3

REBAR

 

For more specific details contact J D Russell Company Corporate Offices at 520 742-6194

 

***************************************GENERAL INFORMATION**************************************

 

PRODUCT NAME: REBAR

 

Distributed by:

GEORGIA-PACIFIC

133 PEACHTREE STREET, N.E.

ATLANTA, GA 30303

Telephone 404 652-5119

 

Creation Date: 4/12/00

 

Manufactured by :

NUCOR STEEL

 

 

Telephone 435 458-2300

 

PO BOX 100 WEST CEMETERY ROAD

PLYMOUTH, UT 84330

EMERGENCY TELEPHONE

435 458-2300

 

 

 

****************************************PRODUCT IDENTIFICATION**********************************

 

IDENTIFICATION  NAME: CARBON AND ALLOY STEEL(S)

 

 

 

************************HAZARDOUS INGREDIENTS/ SARA III INFORMATION*****************

 

COMPONENT

% BY WEIGHT

CAS NO

OSHA PEL

mg/m3

 

ACGIH

TLV/TWA

mg/m3

Iron

94-98

 

10

5

Chromium

0.0-1.2

 

1.0

0.5

Nickel

0.0-1.0

 

1.05

0.1

Manganese

0.3-1.6

 

5

1.0

Molybdenum

0.00-0.35

 

5

5

Copper

0.1-1.0

 

0.1

0.2

Silicon

0.0-2.0

 

Not Established

10

Carbon

0.05-1.00

 

Not Established

Not Established

Cadmium

<0.1

 

0.1

0.05

 

 

 

 

 

PEL – Permissible

TLV – Threshold

 

 

 

Exposure Limit

Limit Value

 

 

 

 

*******************************************PHYSICAL DATA*******************************************

 

Boiling Point:

N/A

Vapor Pressure:

N/A

Appearance and Odor:

Odorless Solid

Specific Gravity:

7.8

Odor

None

Vapor Density:

N/A

Melting Point:

2800° F

Evaporation Rate:

N/A

Solubility in Water:

 

% Volatile by Volume:

N/A

 

 

 

 

 

 

 

REVISION DATE: 041800

 

MATERIAL SAFETY DATA SHEET

Page 2 of 3

REBAR

 

******************************FIRE AND EXPLOSION HAZARD DATA******************************

 

Flash Point:

None

Flammable limits in air by volume:

LEL: N/A    UEL: N/A

Extinguishing Media:

No Fire or Explosion Hazard

Special Firefighting Procedures:

N/A

Unusual Fire and Explosion Hazards:

N/A

 

******************************************REACTIVITY DATA******************************************

 

Stability:

Stable

 

 

Conditions to avoid:

 

 

 

Incompatibility  (Materials to Avoid):

None

Hazardous decomposition or byproducts:

Metal Fumes And Certain Noxious Gases May Be Produced During Burning Or Welding

Hazardous Polymerization:

Will Not Occur

 

 

 

***************************************HEALTH HAZARD DATA***************************************

 

Route(s) of Entry

INHALATION?

SKIN?

INGESTION?

 

YES

NO

YES

 

 

 

 

Health Hazards (Acute and Chronic)

Prolonged, Repeated Exposure To Fumes Or Dust Generated During Cutting,

Welding Or Grinding Operations May Cause Impairment Of Lung Function,

Pneumonitis, “Metal Fume Fever.”

Carcinogenicity

N/A

 

 

 

 

 

 

 

 

 

 

Medical Conditions Generally Aggravated by Exposure

Dermatitis, Pulmonary Disease, Speech Disorders.

 

 

 

 

 

 

 

Signs and Symptoms of Exposure:

Irritation Of The Nose, Throat Or Eyes; Cough, Headache, Nausea, Fever.

 

EMERGENCY AND FIRST AID PROCEDURES:

In Case Of Overexposure, Move Person From Contaminated Area To

Fresh Air. If Eyes Are Irritated, Flush With Water. Seek Medical Aid If

Necessary.

 

 

 

*****************************PRECAUTIONS FOR SPILLS OR LEAKS*****************************

 

Steps to be taken in case material is released or spilled:

N/A

 

 

Waste Disposal Method:

In Accordance With Federal, State And Local Regulations.

 

 

Precautions To Be Taken in Handling and Storage:

No Special Handling Precautions Required

 

 

Other Precautions:

N/A

 

MATERIAL SAFETY DATA SHEET

Page 3 of 3

REBAR

 

*****************************SPECIAL PROTECTION INFORMATION*****************************

 

Respiratory Protection:

Use NIOSH Approved Dust fume Respirator If Contaminant Levels Exceed The PEL Or TLV.

Ventilation:

 

Local Exhaust

Allow For Adequate Ventilation

Mechanical (General)

When Required

Special

None

Other

None

Eye Protection:

Use Face Shield And Appropriate Eye Protection When Cutting, Welding Or Grinding

Protective Gloves:

Use Gloves When Cutting, Welding Or Grinding

Work/Hygienic Practices:

Remove Combustibles From Area When Cutting Or Welding

Other:

Use Welders Apron When Welding

 

 

 

***************************************OTHER INFORMATION***************************************

 

This MSDS Is Based Upon The Corresponding MSDS Created By Nucor Steel And Georgia Pacific

 

 

 

DISCLAIMER: The information provided in this MSDS Sheet was obtained from sources, which we believe are reliable. However, the information is provided without any representation or warranty, expressed or implies regarding the accuracy or correctness.

 

The conditions or methods of handling, storage, use and disposal of the products are beyond our control and may be beyond our knowledge. For this and other reason, we do no assume any responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage , use or disposal of the product.